Tyre pressures show in bar by default; Settings → Display offers kPa
and psi as well. Display only: the car reports kPa and the server keeps
storing kPa.
A "Power, 5-min average" card under Power: the time-weighted mean
battery power over the last five minutes, standing included, from the
same samples as the 5-minute range.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QLJfZQZeAKAwSqViTmLzki
The pages' scroll bars never faded on the car: a ScrollView shows its
bar on every layout, and the live values lay the page out every two
seconds. StableScrollView, the root of every page, now has none.
A new "Energy since start" tile, left of "Usage since start", shows the
net kWh taken from the pack since the trip began, recuperation counted
back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QLJfZQZeAKAwSqViTmLzki
The ABRP credentials are long to type on the car. "Enter on phone"
(Live data tab, and Settings next to the charging price) shows a QR
code; it opens a form on the server where the phone sends the ABRP API
key and user token, charging price and usable capacity, confirmed with
the approval password. The car polls with its own token and collects
the values once, then saves them through the same checks as the fields
on screen.
Same device-flow shape as pairing. The server keeps the values in memory
only, at most ten minutes, hands them out once with no-store, and never
logs them or puts them back into the page; a paired token only reaches
its own installation's request. Pairing's QR dialog is now shared
(PhoneQrDialog), and the phone pages share one stylesheet.
The config file also takes charging_price and usable_kwh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QLJfZQZeAKAwSqViTmLzki
ABRP keeps getting live data while the car server is down: with an ABRP
API key and user token set in the app (Live data tab, or abrp_api_key /
abrp_token in the config file), the car sends the newest sample to ABRP
itself at every upload. It tells the server the newest sample ABRP took
(abrpSentUtc), and the server forwards only newer ones, so ABRP gets
each sample once. Without credentials in the app the server forwards
everything, as before. The credentials sit in encrypted storage, go in
the request body, and neither they nor ABRP's answer are logged.
Settings are grouped by what they are for:
- Live data (was Upload): on/off, ABRP credentials, upload frequency.
- Settings (replaces the Wi-Fi tab): full screen and voice key,
usable capacity and manual SoH (were on Consumption), charging price
(was on Charging), Wi-Fi.
Charging and Live data get icons of their own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QLJfZQZeAKAwSqViTmLzki
"Range since start" replaces the range at current power: remaining
energy over the consumption since the car was switched on, standing
with the climate on included. A trip starts again after 10 minutes
without samples (the car was off) or when charging.
The kWh/100 km for both estimates moved out of the range tiles into
two cards of their own, directly below them; the overview still fits
the full-screen 1920x720 display without scrolling.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QLJfZQZeAKAwSqViTmLzki
Immersive full screen while the app is in front: the system's top and
bottom bars are hidden, and a swipe from the edge shows them briefly.
Re-applied whenever the window regains focus. A "Full screen" switch in
the Upload tab (default on) turns it off.
On the Android 9 emulator the bars are hidden (system UI flags 0x1706),
stay hidden after leaving and returning, and the switch toggles them
through the UI. Whether SAIC's own bars on the MG4 obey the flags is
only known on the car; if they do not, nothing changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QLJfZQZeAKAwSqViTmLzki
The car's key report, from the on-screen key log in 2.7.0:
android.intent.extra.hardkey.keycode = 287 (Integer),
android.intent.extra.hardkey.down (Boolean; one report on press, one on
release) and android.intent.extra.hardkey.longpress (Boolean). 2.7.0
only looked for short names like "keyCode", so it never found the code.
SteeringKeyReport now matches extras by the last part of their name,
case-insensitively, and is Android-free; its tests include the exact
double press logged on the car (releases 279 ms apart). Replayed in the
car's format on the emulator: double press opens the app, single and
long presses do not.
The floating button is removed (class, geometry and test, the overlay
permission, setting, switch and strings): it did not show over the MG4
launcher.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QLJfZQZeAKAwSqViTmLzki
Steering wheel: a double press of the voice key (code 287) opens the
app. The floating button from 2.6.0 does not show over the MG4
launcher, so this is the way back into the app. The head unit reports
keys as the broadcast com.saic.keyevent.hardkey.report, whose extras
are not documented: the receiver tries the usual names (and an
embedded KeyEvent), and counts one press per report whichever way the
up/down field turns out to work; long presses never open the app. The
last 20 reports are listed raw on the Logs tab, so if the guess
misses, a photo of that list gives the real format. A switch in the
Upload tab turns it off. DoublePressDetector (500 ms window) has 5
tests; on the emulator, simulated double presses open the app and
single presses, other keys and long presses do not.
Scrolling: pages jumped back to the top on every 2 s refresh. A stack
trace on the emulator showed why: ViewPager2's RecyclerView lays the
pages out while measuring, at a provisional height, and
ScrollView.onLayout clamps the position to 0. StableScrollView keeps
the driver's position across layouts and is now the root of every
page; the scrolled Charging page stays put across refreshes.
Vehicle tab: all six value tiles, including both range estimates, sit
in one row at the top, so nothing needs scrolling at 1920x720.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QLJfZQZeAKAwSqViTmLzki
The MG4's launcher does not list third-party apps, so the app could
only be opened by reinstalling it. Now a small round MG-red button
floats over the car's screens: tap opens the app, drag moves it (the
position is kept and clamped to the screen), and it hides while the
app itself is open. A switch in the Upload tab turns it off.
The always-on service owns the overlay, so the button is there from
boot. It needs the overlay permission (SYSTEM_ALERT_WINDOW), which the
car build has through the system UID; without it, or if the window
manager refuses, the button stays away and nothing crashes, and the
Upload tab offers the system permission screen.
Tested on an Android 9 AOSP emulator at the head unit's 1920x1080 /
160 dpi with the car APK (installs as UID 1000): button appears over
the home screen, tap opens the app, hidden while open, drag moves it
without opening the app, position survives a force-stop, the switch
works through the UI. FloatingButtonGeometry has 3 unit tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QLJfZQZeAKAwSqViTmLzki
The Vehicle tab gets two tiles next to the car's own range:
- Range at current power: remaining energy / (power / speed) right now.
- Range at 5-min average: remaining energy / (energy used / distance
driven) over the last 5 minutes, integrated time-weighted from both
the service tick (15 s) and the open screen (2 s), so it is ready as
soon as the app opens.
Each shows the consumption it is based on (kWh/100 km). Remaining
energy is SOC x usable capacity, because the car publishes no pack
energy; the capacity is a new setting in the Consumption tab (default
50.8 kWh, the 51 kWh battery). Estimates read "—" with the reason when
they cannot mean anything: standing still, regenerating, too little
driving, or across a gap in the samples; over 999 km shows "> 999 km".
RangeEstimator is Android-free and has 7 tests. Also fixes the battery
card's note, which still said the SoH goes to MongoDB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QLJfZQZeAKAwSqViTmLzki
- New Server tab: server URL, ingest token and installation id, with
Save, Test connection (health, then a read-only token check) and the
config-file import that upstream removed (app folder / USB stick first,
document picker as fallback). Settings are kept encrypted and read on
every use, so the service picks up a change without a restart. Each
installation generates its own id; the inherited upstream UUID and
the baked-in CONSUMPTION_API_* build fields are gone.
- Live telemetry restored from before ea8032a (TelemetryPayload,
UploadCadence, UploadSettings, GPS) and sent in batches to
POST /v1/telemetry instead of ABRP; the server forwards to ABRP. Adds
ext_temp, voltage and current. Unsent samples queue in memory (about
8 h) while offline.
- Upload tab: the live-telemetry switch and cadence controls work again;
the dead service and autostart switches are removed.
- Manifest: location permissions and foreground service types.
- Unit tests compile again: 114 (stable) / 136 (unstable) pass. Tests
for the deleted AbrpApi and HeadUnitWeather removed; new tests for
ServerConfig and TelemetryQueue. Lint passes.
Not yet tried on the car.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
nilsandClaude Opus 5.5