Commit Graph
3 Commits
Author SHA1 Message Date
nilsandClaude Sonnet 5.5 70dddad206 Add IPv6 inside the PPP session and use enp2s0 in the example
- wan.ipv6.transport = "ppp": IPv6CP in pppd, router advertisements and
  DHCPv6 prefix delegation on the PPP device, DHCPv6 accepted on the PPP
  device, IPv6 MSS clamped to MTU-60. Allowed on a shared single-NIC
  link. A build-time check requires a PPPoE uplink.
- IPv4 MSS clamping now only matches IPv4 packets.
- The example uses the new box's NIC name (enp2s0).

Covered by the onestick VM test (radvd and a minimal DHCPv6-PD
responder as the ISP) and assertion cases.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-28 15:03:57 +01:00
nilsandClaude Sonnet 5.5 b5429ad876 Add local DNS records, DHCP reservations and an installer ISO
DNS and DHCP (needed to replace a dnsmasq-based router):
- router.dns.domain/hosts/overrides/forwardZones: authoritative local
  domain, split-horizon host records with reverse entries, wildcard
  overrides and per-zone forwarders (private zones skip DNSSEC).
- lans.<n>.dhcp.reservations: Kea host reservations, published in DNS.
- Tunnels with dns = true admit what their peers route, so a
  site-to-site peer without a transfer address can use the resolver.

Installer:
- router-install wipes a disk, creates an ESP and an ext4 root and
  installs a prebuilt system with its secrets; nothing is built on the
  box. installed-layout is the shared disk layout contract.
- lib.mkInstaller builds an ISO for a given nixosSystem;
  packages.installer-example is the example's ISO.

Covered by the dns and installer VM tests (the latter installs onto an
empty disk and boots it under UEFI), wireguard DNS and assertion cases.
PLAN.md records the remaining gaps for replacing the hand-written router.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-28 12:31:44 +01:00
nilsandClaude Sonnet 5.5 0653b5cf2f Add router-on-a-stick, commit-confirm rollback and an example config
- Allow the WAN link to also carry LANs when the uplink is PPPoE on a
  VLAN with IPv6 off; only the PPP device counts as an uplink then, so
  LAN traffic can never match WAN rules.
- Add router.rollback: router-arm / router-confirm / router-rollback
  plus `nix run .#deploy`, a commit-confirm deployment flow.
- Wait for the LAN devices instead of the uplink in networkd
  wait-online, so an unplugged uplink cannot block boot or activation.
- Add examples/desktop (single NIC, PPPoE on VLAN 1001) as
  nixosConfigurations.example, built as a flake check.

Covered by the onestick and rollback VM tests and new assertion cases.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 23:09:09 +01:00