Web UI: dark/light themes (appliance layout, sidebar, switch checkboxes),
theme preference on the Advanced page, Changes page with the pending diff.
Interface names: router.interfaces.<name>.mac, lans.<l>.deviceName and
pppoe.vlanName; a rename is staged for the next reboot by router-apply.
Remote access: an MCP server (POST /mcp) and an OpenAPI REST API
(/api/v1, /api/openapi.json) with the same tokens, scopes, limits and audit
log; tools to read status, settings, leases, logs (get_logs), and to edit
and check the saved settings (never applied). Tokens on the API access page.
Firewall: a reserved `local` zone (the router itself) as the destination of
rules, so the web UI or SSH can be allowed from the WAN.
PLAN.md lists what is still left.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AeFqV9dZrK6nipHkPfyM4F
- wan.ipv6.transport = "ppp": IPv6CP in pppd, router advertisements and
DHCPv6 prefix delegation on the PPP device, DHCPv6 accepted on the PPP
device, IPv6 MSS clamped to MTU-60. Allowed on a shared single-NIC
link. A build-time check requires a PPPoE uplink.
- IPv4 MSS clamping now only matches IPv4 packets.
- The example uses the new box's NIC name (enp2s0).
Covered by the onestick VM test (radvd and a minimal DHCPv6-PD
responder as the ISP) and assertion cases.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
IPv6: router.wan.ipv6.enable mirrors the existing uplink config (DHCPv6 with
WithoutRA=solicit, delegated prefix). The ISP delegates a single /64, so
exactly one LAN may claim it via router.lans.<name>.ipv6.pd (asserted); other
LANs stay IPv4-only. SLAAC only, no NAT66.
PPPoE: router.wan.ipv4.type = "pppoe" runs pppd on an optional VLAN of the
uplink, with the password read from a file at service start (never the Nix
store). NAT, forwarding and MSS clamping (MTU 1492) use the derived PPP
device; native IPv6 stays on the untagged link.
Tests: basic.nix is parameterised by uplink type; the pppoe variant uses a
fake ISP with pppoe-server (VLAN 7, CHAP). Both variants cover IPv6 PD, SLAAC,
routing without NAT and WAN-deny. Assertion tests gain PD/PPPoE cases and a
full-system evaluation step.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
nilsandClaude Sonnet 5.5