The bass from Android's audio analyser drives the glow and brightens the
carving on the beat, only while the style is on screen. Yellow and green and
the embers keep their meaning; without a signal, as with the radio, the light
stays as it was. Levels only. Tried on the emulator. Not tried on the car.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
One tap listens for 10 seconds with Android's audio analyser on the output
mix and reports the levels, to learn whether it hears Bluetooth, CarPlay and
radio before the Halloween pumpkin's light follows the music. Levels only, no
sound kept, no microphone. Heard a test tone on the emulator. Not tried on
the car.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
Día de Muertos is an ofrenda: papel picado for the battery, a calavera
with the speed in a ring of marigolds for the power, candles for the
range, a path of petals for the last two minutes of power. Halloween is
a graveyard hill: a jack-o'-lantern with the speed in its grin, embers
for the power, a potion flask for the battery, a tombstone and bats for
the range. Each has its own palette; Tally counts what a value lights.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
In the car, 2.42.0's check stopped the Bluetooth music and raised a
media-access prompt: binding every media browser service started the
car radio and the Local Media Player. The services are now only listed;
the active media sessions already carry the song of Bluetooth and
CarPlay without any connection.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
Before a now-playing display, find where the head unit tells what is
playing, read only: the players Android reports, the active media
sessions, and every media browser service with its song, CarPlay's
(com.allgo.remoteui.mediabrowserservice) among them. The report is saved
and sent like a signal recording (shared SignalRecorder.saveCopies).
Also the findings of the first two recordings from the server.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
A finished signal recording goes to an outbox and is sent gzipped with
the car's token (PUT /v1/logs/{name}); the service retries every 2
minutes while the car is offline. The server keeps the newest 200 on a
new volume (LOGS_DIR); reading takes a token of its own (LOGS_TOKEN).
fetch-logs in the dev shell fetches new ones into logs/.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
listenToProperties looked only for registerCallback (Android 10); the
car's car library has registerListener/unregisterListener. Take either,
unsubscribe property by property, and say why when it fails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
The ACC recording of 2.32.0 only polled, and the AAD_* properties read
their defaults. The head unit's own assistance manager never polls them:
it subscribes to each for change events, and a vendor HAL may fill a
value only while someone listens. EVHardware gains a read-only
listenToProperties and AssistBlock (global vendor properties 0x21x0A1xx,
all 108 AAD_* ids); the recorder subscribes to that block for its three
minutes and lists the properties heard, those with changing values first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
The map was hardware-rendered, but every frame recomputed every road
point, rebuilt every path and drew the big roads three times, at 20
frames a second, and the car jumped with each GPS fix. Now it is its own
view under the Grid (MapLayerView, a hardware layer): drawn once into a
GPU texture and only redrawn when tiles change or after about 230 m;
each display frame only sets its translation and rotation. The car
glides between fixes, and the Grid over the map redraws only with the
readings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
The car refuses the installer session, and only a refusal thrown at
once opened the installer screen; one that came back through the
session's result ended in a toast, so the update downloaded and then
nothing seemed to happen. Now any result but success or the driver's
cancel opens the installer screen with the verified APK, as does a
confirmation that cannot be shown, and a session silent for 20 s is
abandoned for it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
The map fills the whole screen, top-down and heading up, about 400 m
ahead and 450 m to each side, over a ground grid that turns with it.
The speed moves to a panel under the gears; the battery wall, the
clock, the gears and the disc stand on dark panels over the map.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
The map gets its own camera, tilted 45 degrees down from about 300 m up,
so roads keep their shape some 400 m ahead instead of collapsing into
the horizon. In map mode the floor starts at half height, the speed is a
little smaller, the floor's grid is fixed to the ground and turns with
the roads, and the power disc has a dark backing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
The public Overpass answered 429/502 and needs ~40 s a tile while the
car gives up after 8 s, so the server cancelled its queries and the
car's retries added load. Now the server fetches only the tiles a car
asks for, as OpenStreetMap vector tiles from OpenFreeMap (MAP_TILES_URL),
decodes the transportation layer with a small reader of its own, and
keeps each tile 30 days on a volume (MAP_CACHE_DIR). A fetch finishes
even after the car has stopped waiting; the car hears 503 with
Retry-After and gets the tile on its next try.
App: OpenFreeMap/OpenMapTiles attribution on the map, retry after 15 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
A new Overview style: the Grid over the roads round the car from
OpenStreetMap, drawn in the floor's perspective, heading up, the bigger
roads glowing brighter, the car as a chevron.
Server: POST /v1/map/roads {z:14,x,y} fetches a tile's drivable roads
from Overpass (OVERPASS_URL; one request at a time, at least a second
apart), simplifies them to tile-local points in four classes, caches
them for 30 days and never logs the tile.
App: MapRoads keeps the 3x3 tiles round the car from its own cache or
the server; GPS only while the style is shown; bearing from the GPS or
from successive positions. Without GPS, server or roads the plain floor
says why. OSM attribution on screen and in LICENSE.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
Visor, after Halo's helmet display: the battery as the shield bar, the
range as the ammunition counter, P R N D as grenade slots, the speed in
the reticle with power round it, and the power trail as blips on a
motion tracker that sweeps while moving. Original blue or the accent.
Empire, after Age of Empires: a wooden resource bar, an isometric world
that moves with the speed, the car as the selected unit, P R N D as
commands, a diamond minimap, and ages by odometer (EmpireAge, tested).
The app takes the player's blue.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
Time circuits, after Back to the Future: three LED rows (the car as the
destination, the present time, the last departure from P), the speed in
red digits and a flux capacitor that flows with the power; at 88 km/h
it all flashes. Letters on fourteen segments (Segments14, tested).
Quest, after World of Warcraft's interface: player frame, minimap, gold
speed, cast bar, quest tracker, chat, action bar and the odometer as
experience. Both in their own colours, the app with them. In THEMES.md
with screenshots. Emulator only; not tried on the car.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
Neon lines on black over a perspective grid floor that moves with the
speed; the battery as a light wall, power on a disc whose inner ring
turns with it, and the last two minutes of power as a light-cycle trail
of right angles (the Cockpit's PowerTrace, now in ClusterValues). Cyan,
or the accent colour; in cyan the app turns cyan too. In THEMES.md with
two screenshots. Emulator only; not tried on the car.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
The full-screen button's disc was an oval (an even inset in a 64 x 72 dp
area); the area is now a square 72 dp, pulled into the panel's padding
so the logo keeps its line. THEMES.md shows the twelve Overview styles,
each with and without the navigation (emulator, sample values), with
what inspired each; linked from README.md and AGENTS.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
While the style shows its own palette (Sci-fi, Cartoon, Aviation, Nixie;
Retro and Terminal with "Original"), the navigation, buttons and titles
take it instead of the accent colour, e.g. turquoise for Retro
(StylePalette, style_palettes.xml). Blueprint and Mascot are removed; a
stored one opens Tiles. The navigation no longer saves view state, which
crashed a restore across the wide and narrow layouts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
Without the app's own full screen, the car's sidebar takes the left edge
and a swipe from there never reaches the app. A small tab at the app's
left edge now brings the navigation back, by a tap or a swipe from it.
In the app's full screen the handle and edge swipe stay as they were.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
The car falls back to its own default mode at every start. With "Set at
start" (on by default), the service sets the mode last chosen on
Settings and confirmed by the car again, once, while the car is in P at
0 km/h, and gives up as soon as the car leaves P or after two minutes
(DriveModeWrite.atStart, unit-tested). The buttons and the start share
the write and read-back (DriveModeSetter). Not tried on the car.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
The owner lifted the read-only rule for the drive mode alone. Settings
has Eco, Normal, Sport, Snow and Custom; the lit button is what the car
reports. A tap reads gear and speed fresh and writes only in P at 0 km/h
(DriveModeWrite, unit-tested; unreadable is a refusal), through a CPM-only
write behind EVHardware's standstill gate, then reads the mode back and
says what the car reports. The wide layout's charging price joined the
battery card so the page still fits. Not tried on the car.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
The 2.32.0 recording (ACC set to 101, 90 and 80 km/h behind another car)
found none of it among 1,194 values: the head unit does not get the ACC
data. Removed the cruise log and the set-speed read (EVHardware is as
before 2.27.3); the finding is under "Signals the car does not provide".
The recorder stays as the Signal recorder, for finding other signals.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
The 2.31.1 log on the car showed the named assist properties constant
while ACC was engaged behind another car: they are not fed. The recorder
reads every property and vendor getter (read only, at most half the time
busy) for 3 minutes, plus steering-wheel key broadcasts, and lists what
changed, the rarest first. The recording is saved in the app and on a
USB stick if one is plugged in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
The 2.27.3 log wrote a line only when the target speed changed, so the
car showed one line at the start. Now a line is written on any change of
a mode or the target and every 2 s while driving, with the raw
driver-assistance properties (target speed, assist and speed-assist
modes, the followed object) and the reason for any unread value. The
last 600 lines are kept in an appended file; the Logs tab shows 150.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
The Overview's full-screen button moved from the page's corner into the
navigation, beside the MG4 logo. A swipe in from the left edge (EdgeSwipe,
unit-tested) brings the navigation back; a faint handle marks the edge.
Sideways swipes no longer change the page: only the navigation does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
FoxFigure draws a sitting fox with a scarf in the accent colour whose
ears and tail act the mood with the face: wagging, stiff, drooping,
laid back. The chibi's shared parts (frame, eyes, mouths, limbs by
mood, effects) moved into ChibiBase, which both figures extend.
Settings → Mascot: Classic / Chibi / Fox.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
ChibiFigure draws a small, full-figure co-pilot in a hoodie whose whole
body acts the mood (waving, arms up and hopping, fist, hands on cheeks,
nose bubble, pointing back, leaning into the wind). Settings → Mascot
(Classic / Chibi, MascotCharacter) shows only for the Mascot style; the
chibi has lines of her own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
MascotView draws her head and shoulders beside speed, gear, battery,
power, usage and trip. MascotMood picks her expression from the reading
(waiting, reverse, worried, asleep, cheering, determined, fast, content)
and holds a new mood for 1.5 s so values at a threshold do not make her
flicker. A speech bubble carries a line per mood.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
The head unit names a vendor float AAD_EPTCCTRGTSPD (0x2160A15B),
the cruise control target speed by its name. EVHardware reads it raw;
the Logs tab lists each change with time, speed and gear, to establish
the unit and the off value on the car. Emulator only (absent there).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
Retro and Terminal are one entry each; the accent colour drop-down
offers "Original" first for them, remembered per style. The old
"Retro (accent colour)" entry is folded in and its stored value
migrated. Emulator only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
Settings → Display now has the Overview style first with the accent
colour beside it; for styles with their own palette the accent field is
greyed out with a note. Styles are an enum, OverviewStyle, with
usesAccent (unit-tested). Emulator only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
A small button in the Overview's top-right corner hides the app's
sidebar (or bottom bar) and brings it back; only on the Overview,
remembered, swiping still works. Emulator only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
Five more styles that differ in arrangement as well as look: the speed
alone with hairlines; a green text terminal with ASCII bars; a flight
display with tapes and a horizon that pitches with power; nixie tubes on
walnut and brass; a watch face with sub-dials. They share a new base,
ClusterCanvasView. Emulator only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
After the classic MG dashboards: three octagonal dials with chrome
bezels, cream scales and accent-coloured needles for speed, battery and
power, and a cream line of odometer, trip, usage, climate and clock.
No MG logo. Emulator only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
Sci-fi: a starship console with elbow frames, pill labels and block
graphs, red alert below 20 %. Cartoon: comic panels, a battery with a
face, a springy speedometer and sound words for power. Blueprint: a
top-view drawing with the battery hatched to the charge, tyre pressures
on leader lines, power as a force arrow and a title block. Styles are
now mapped to panes in a table. Emulator only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
"Retro (accent colour)" draws the display in the chosen paint colour
and the labels in its light shade; regeneration stays green, a low
battery turns amber. Listed under Retro. Emulator only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
Retro: an 80s vacuum fluorescent cluster with seven-segment digits,
bar graphs and a lit P R N D selector. Futuristic: a hairline HUD with
an animated energy flow between battery and wheel, a turning speed ring
and a power arc. Both show unread values as dashes. The Overview now
reads the car five times a second. Emulator only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
Codes read on the owner's car with 2.22.1: 1 P, 2 R, 3 N, 4 D. Gear
maps them (unit-tested); other codes show no letter, unread "—". The
temporary gear list on the Logs tab is removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
The badge said "D" for every gear that was not P, so N and R read as D.
EVHardware now passes on the raw gear code; the badge shows P for 1,
no letter for codes not yet mapped, "—" when unread. The Logs tab lists
each change of the code with time and speed, to match R, N and D on
the car. Emulator only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
A third Overview style beside Tiles and Dashboard: rings for battery,
power (zero at the top, regeneration anticlockwise in green) with the
speed and gear inside, and 5-minute usage with a tick for the average
since start; below, the power of the last two minutes, the clock,
climate and odometer. Unread values light nothing and show "—"; the
trace leaves gaps (PowerTrace, unit-tested). Emulator only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LhzAVaUyqcw5PkGjz4mWW6
nilsandClaude Opus 5.5