Rules from wan are edited in their own table: protocol, ports, zone, host,
host port, allowed sources, port forward (NAT), hairpin, log and rate
limit, with the module's checks done up front.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AeFqV9dZrK6nipHkPfyM4F
The firewall page now manages zones (assign each LAN or tunnel, add and
remove zones) and rules with zone, address and port on both sides plus the
protocol. router.firewall.zones declares zones without members and rules
take sourcePorts. The temperature chart draws every thermal zone and hwmon
sensor; the overview defaults to 15 minutes, 1h stays an option.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AeFqV9dZrK6nipHkPfyM4F
Allow rules between zones (LANs and tunnels) are edited on their own page:
from, to, protocol, ports, destination. Port forwards and rules with more
options are listed and kept as they are.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AeFqV9dZrK6nipHkPfyM4F
router-webui leases-dns reads Kea's leases and publishes <name>.<domain>
with reverse records in the running Unbound (router.dns.dynamicLeases).
Names the configuration publishes are never taken over; a client's name
is cut to its first label and kept inside the local domain; of two
clients the newer lease wins. The DNS page switches it on and shows what
is published and what was skipped; router-setup enables it with a domain.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AeFqV9dZrK6nipHkPfyM4F
Web UI: a WireGuard page (tunnels, peers, keys made on the router, client
configs with a QR code, import of wg-quick configs, live status), a DNS page
(records, wildcards, forward zones), interface dropdowns with VLAN devices,
IPv6 options and a local domain. router-setup asks about VLANs, IPv6 and
the domain. The router publishes its own name in DNS and hands the local
domain to DHCP clients; wg and jq are on the router. Includes a script
that takes over antigua's tunnels.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AeFqV9dZrK6nipHkPfyM4F
The DHCP page edits the reservations per LAN (checked like the module's
assertions) and offers active clients for reservation. The web UI checks
that need no installed system moved from apply.nix into webui.nix (one
node, under a minute); apply.nix shares one apply for the pool change and
a reservation.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AeFqV9dZrK6nipHkPfyM4F
The web UI lists physical and VLAN interfaces and takes a VLAN uplink as
a device name (enp2s0.1001); it has IPv6 checkboxes for the WAN and each
LAN. router-setup asks whether to create VLANs before WAN and LAN are
picked, and whether to enable IPv6. --config-only writes the
configuration without installing, which the setup test uses for a PPPoE
uplink on a VLAN.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AeFqV9dZrK6nipHkPfyM4F
router-release signs a release as a binary cache; router-update verifies
it against the router's update keys, migrates settings.json, and applies
it with commit-confirm. Includes the web UI page and a VM test.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AeFqV9dZrK6nipHkPfyM4F
router-webui (Go, standard library only) edits settings.json: host
name, WAN (DHCP or PPPoE), LANs with DHCP, and the raw JSON for the
rest; keys the forms do not know are kept. It applies and confirms by
starting router-apply.service and router-confirm.service, which a
switch never restarts, and shows the build log and the rollback
countdown. HTTPS with a self-signed certificate, a PBKDF2 password
hash, CSRF tokens and an Origin check; reachable from management LANs
only (new router.managementPorts).
router-apply records the settings it built and router-confirm keeps
them as settings.confirmed.json (new rollback.onConfirm hook), so the
UI can tell unapplied changes and discard them.
checks.apply now also logs in from a LAN client, discards the change
left by the rollback, edits the DHCP pool, applies and confirms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
nilsandClaude Sonnet 5.5