Web UI: a WireGuard page (tunnels, peers, keys made on the router, client
configs with a QR code, import of wg-quick configs, live status), a DNS page
(records, wildcards, forward zones), interface dropdowns with VLAN devices,
IPv6 options and a local domain. router-setup asks about VLANs, IPv6 and
the domain. The router publishes its own name in DNS and hands the local
domain to DHCP clients; wg and jq are on the router. Includes a script
that takes over antigua's tunnels.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AeFqV9dZrK6nipHkPfyM4F
router-release signs a release as a binary cache; router-update verifies
it against the router's update keys, migrates settings.json, and applies
it with commit-confirm. Includes the web UI page and a VM test.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AeFqV9dZrK6nipHkPfyM4F
Kea skips interfaces without carrier when it opens its sockets and only
looks again on a reload, so a LAN cable plugged in after Kea started got
no DHCP until a restart. networkd-dispatcher now restarts Kea when a DHCP
LAN gets carrier (a restart: a SIGHUP while Kea is starting ends it). The
rule script is the same for every configuration and reads the interfaces
from /etc/router/dhcp-interfaces, so the device never has to rebuild it
(writeShellApplication's shellcheck could not be built offline).
The web UI refused every login from a browser with "forbidden": under
Referrer-Policy no-referrer browsers send "Origin: null" with form posts.
Use http.CrossOriginProtection (Sec-Fetch-Site, then Origin) and a
same-origin referrer policy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AeFqV9dZrK6nipHkPfyM4F
router-webui (Go, standard library only) edits settings.json: host
name, WAN (DHCP or PPPoE), LANs with DHCP, and the raw JSON for the
rest; keys the forms do not know are kept. It applies and confirms by
starting router-apply.service and router-confirm.service, which a
switch never restarts, and shows the build log and the rollback
countdown. HTTPS with a self-signed certificate, a PBKDF2 password
hash, CSRF tokens and an Origin check; reachable from management LANs
only (new router.managementPorts).
router-apply records the settings it built and router-confirm keeps
them as settings.confirmed.json (new rollback.onConfirm hook), so the
UI can tell unapplied changes and discard them.
checks.apply now also logs in from a LAN client, discards the change
left by the rollback, edits the DHCP pool, applies and confirms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- wireguard.<n>.sourceAddresses: source for router-originated traffic
into a tunnel without an address of its own (PreferredSource on the
routes); checked at build time.
- examples/home: antigua's routing role ported to the router module
(PPPoE with IPv6 inside the session, LAN with ULA and reservation,
local DNS and forward zones, the freifunk/family/mobile tunnels with
explicit zone rules, ddclient following the PPP device).
nixosConfigurations.home, packages.installer-home and a flake check
that builds it.
- PLAN.md: the remaining antigua gaps and the open question about
services that stay behind the router.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
lans.<n>.ipv6.address (a ULA /64) is assigned to the LAN, announced
with an explicit prefix (networkd only announces the delegated prefix
when prefix delegation is on) and advertised as RDNSS; Unbound listens
and answers on it. Checked at build time: valid IPv6 CIDR, /64, fc00::/7.
Covered by the onestick VM test (client SLAAC address, ping and DNS over
the ULA, RA captured on the wire), assertion cases and a unit test for
the /64 prefix helper.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- wan.ipv6.transport = "ppp": IPv6CP in pppd, router advertisements and
DHCPv6 prefix delegation on the PPP device, DHCPv6 accepted on the PPP
device, IPv6 MSS clamped to MTU-60. Allowed on a shared single-NIC
link. A build-time check requires a PPPoE uplink.
- IPv4 MSS clamping now only matches IPv4 packets.
- The example uses the new box's NIC name (enp2s0).
Covered by the onestick VM test (radvd and a minimal DHCPv6-PD
responder as the ISP) and assertion cases.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
DNS and DHCP (needed to replace a dnsmasq-based router):
- router.dns.domain/hosts/overrides/forwardZones: authoritative local
domain, split-horizon host records with reverse entries, wildcard
overrides and per-zone forwarders (private zones skip DNSSEC).
- lans.<n>.dhcp.reservations: Kea host reservations, published in DNS.
- Tunnels with dns = true admit what their peers route, so a
site-to-site peer without a transfer address can use the resolver.
Installer:
- router-install wipes a disk, creates an ESP and an ext4 root and
installs a prebuilt system with its secrets; nothing is built on the
box. installed-layout is the shared disk layout contract.
- lib.mkInstaller builds an ISO for a given nixosSystem;
packages.installer-example is the example's ISO.
Covered by the dns and installer VM tests (the latter installs onto an
empty disk and boots it under UEFI), wireguard DNS and assertion cases.
PLAN.md records the remaining gaps for replacing the hand-written router.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Allow the WAN link to also carry LANs when the uplink is PPPoE on a
VLAN with IPv6 off; only the PPP device counts as an uplink then, so
LAN traffic can never match WAN rules.
- Add router.rollback: router-arm / router-confirm / router-rollback
plus `nix run .#deploy`, a commit-confirm deployment flow.
- Wait for the LAN devices instead of the uplink in networkd
wait-online, so an unplugged uplink cannot block boot or activation.
- Add examples/desktop (single NIC, PPPoE on VLAN 1001) as
nixosConfigurations.example, built as a flake check.
Covered by the onestick and rollback VM tests and new assertion cases.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Extend router.firewall.rules with a reserved `wan` source zone: DNAT
(dnat, toPort), port ranges, source allow-lists, per-source rate
limits, logging and optional hairpin NAT. IPv6 is opened only by
explicit pinholes. Build-time assertions require WAN rules to name a
destination, protocol and ports so a typo cannot expose a whole zone.
Covered by the basic/pppoe VM tests and the assertion tests.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
router.wireguard.<name> configures tunnels through networkd: road warrior
(listening, dual-stack), site-to-site (no transfer network) and provider
dial-out with masquerade. A tunnel has a zone like a LAN, so inter-zone rules
apply; management, DNS and internet are opt-in. Peers' allowedIPs become
routes (destination-based routing; default-route tunnels are rejected).
Tunnels have a kill switch (default on): forwarded packets for their
allowedIPs are dropped if they would leave via an uplink, before the
established-accept so flows that used the tunnel are cut too.
Private keys stay outside the Nix store and are passed to the unprivileged
systemd-networkd with LoadCredential, so key files can be root-only.
Assertions cover CIDR/key/endpoint formats, duplicate allowedIPs, overlaps
with LAN subnets, port and device clashes, and rule destinations inside
tunnel networks. A five-VM `wireguard` check covers road warrior, site-to-site,
the provider tunnel with an IPv6 transfer net, zone rules and the kill switch.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
LANs can sit on an 802.1Q VLAN (`vlan` on a trunk `interface`); networkd
creates the device and brings the trunk up. LANs belong to a named `zone`
(default: their own name). Traffic inside a zone is forwarded freely, traffic
between zones is denied unless a `router.firewall.rules` entry allows it
(protocol, ports, optional destination inside the target zone).
Internet access is now opt-in per LAN (`internet`, default false), replacing
the previous allow-out default. Assertions reject unknown zones, bad
destinations, duplicate devices, over-long device names and a WAN trunk.
Kea subnet IDs now come from the network address so adding LANs does not
renumber them and orphan persistent leases.
Tests: a five-VM `vlans` check (untagged + two VLANs, shared zone, one-way
rules, per-host destination restriction), new assertion cases, parseNet unit
tests, and shared test tooling in tests/common.nix.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
IPv6: router.wan.ipv6.enable mirrors the existing uplink config (DHCPv6 with
WithoutRA=solicit, delegated prefix). The ISP delegates a single /64, so
exactly one LAN may claim it via router.lans.<name>.ipv6.pd (asserted); other
LANs stay IPv4-only. SLAAC only, no NAT66.
PPPoE: router.wan.ipv4.type = "pppoe" runs pppd on an optional VLAN of the
uplink, with the password read from a file at service start (never the Nix
store). NAT, forwarding and MSS clamping (MTU 1492) use the derived PPP
device; native IPv6 stays on the untagged link.
Tests: basic.nix is parameterised by uplink type; the pppoe variant uses a
fake ISP with pppoe-server (VLAN 7, CHAP). Both variants cover IPv6 PD, SLAAC,
routing without NAT and WAN-deny. Assertion tests gain PD/PPPoE cases and a
full-system evaluation step.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Add an IPv4 helper lib (parse, netmask, cidr, overlap) and derive
router.lans.<name>.ipv4.subnet from address and prefixLength instead of
requiring it twice. New assertions reject invalid addresses, DHCP pools that
are reversed, outside the subnet or contain the router address, and
overlapping LANs.
Add `lib` unit tests and an `assertions` check that evaluates broken configs
and compares the exact error messages.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
router.* schema (wan, lans, dns.forwarders) compiled to systemd-networkd,
a generated nftables ruleset with NAT, Kea DHCPv4 and Unbound, plus build-time
assertions against lock-out and interface conflicts.
tests/basic.nix is a three-node VM test (upstream/router/client) covering WAN
DHCP, LAN DHCP and DNS, NAT, WAN-deny and LAN SSH/ping. `nix run .#lab` boots
the same topology in tmux with one console pane per VM and the driver REPL.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
nilsandClaude Sonnet 5.5